quadient DS-1200 G4i

22
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
5 Running a job
5.1 Running an existing job
This describes running an existing job. To create a new job, see section 7.
NOTE:
Paper hoppers must be loaded with stationery rst before running a job.
See section 8 Setting up the machine for further information.
1 Select Jobs button at the top. To run the job currently showing on the Run
screen, press Exit. To run a dierent job instead, select it from the list and press
Accept. You will switch to the Run screen with that job.