quadient DS-1200 G4i

16
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
4.3.3 Fine tuning of settings
Fine adjustments apply only to current job.
Inserter Fine Tuning
On the Run screen graphic, press anywhere on the Inserter icon.
Note that each heading expands.
You can change:
• Seal mode: Turn o to leave envelopes unsealed.
• Doubles detect: Turn o if thick or dark envelopes give false readings.
• Separator wear: Adjust separator gap only if needed (1 clock = 0.015mm).
This changes the gap on the unit and applies to all jobs: see also Gap Adjust
below.
• Documents: Changes to the envelope depth, width, ap and throat.
• Wetting: changes the amount of wetting (1-8) where higher numbers give
greater wetting.