35
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
Feeders: Allows a substitute feeder to be used instead of the selected one,
eg. if feeder 1 in the ‘Actual’ column is set to feeder 3, a select feed character
set to feeder 1 would feed from 3 instead. If more than one substitute is set,
all of them will feed, as well as the actual.
Diverters: Allows the substitution of any divert unit on the machine for any
other. Sheet divert 1 is the lower tray, output divert 1 is closest to machine.
To delete all substitutions, select Clear all.
IMPORTANT:
Any substitutions set in the Job setup will apply to only to that job.
6 Press Next when complete.
To Next Page
Loading...
