Quail Digital Pro9 User Manual

Pro9
Headset System
Installation Manual
Scan first to view
installation video

Quail Digital Pro9 Specifications

General

Brand	Quail Digital
Model	Pro9
Category	Headsets
Language	English

Summary

System Installation and Setup

Order Point Component Installation

Drive-Thru Module and Cabling Setup

Base Station Installation and Connection

Headset Registration and System Testing

Register headsets, test audio links, and configure road loop sensitivity for proper operation.

Advanced Configurations and Features

Appendix B: Using Existing Cabling with DTM

Connect base station to DTM using existing cabling via network termination boxes.

Appendix C: Existing Cabling to DTM in Building

Connect base station to DTM using existing cabling via junction boxes (Q-P9JB).

Appendix E: Pro9 Repeaters for Range Extension

Appendix F: Pro9 Table Service Configuration

Appendix G: System Setup via Computer

Connect a laptop via RJ45 to the base station network port for system adjustments.

Appendix H: Wireless Computer Connection

Use a WiFi bridge to connect wirelessly to the base station for configuration.

Appendix I: Dual Lane and Tandem Setup

Appendix J: Recording a 'Pull Forward' Message

Troubleshooting and Maintenance

Base Station LED Troubleshooting

Guides through base station LED flashes to diagnose and resolve issues.

Repeater and Headset LED Troubleshooting

Explains troubleshooting steps based on repeater and headset LED indicators.

Battery Handling and Replacement