QUANTECH
134
FORM QTC3-NM1
ISSUE DATE 08/03/2022
SECTION 7 – UNIT CONTROLS
Cooling Setpoints Key Schedule/ Program Mode
(press key to adv.) Advance Day Key (press enter to adv.)
Local Leaving Mon. – Sun. Discharge
Water Temp Control & Pressure
(Display Only) Holiday Cutout
Schedule
Chilled Liquid Suction
Setpoint Pressure
& Cutout
Range
Remote Setpoint Low Ambient Temp.
& Cutout
Range
(Display Only)
Leaving Liquid
EMS - PWM Temperature
Remote Temp Cutout
Res
et Setpoint
Anti-Recycle
Timer
Fan Control
On-Pressure
Fan Differential
Off-Pressure
Quick Reference Programming Chart
Setpoints Section
SYS / Unit
Trip Volts Option
Number of
Fans Per System
Total Numbers
of
Compressors
Remote Unit ID
FIGURE 27 - SETPOINTS QUICK REFERENCE LIST
Table 12 provides a quick reference of the setpoints list for the Setpoints Keys.
LD07404c
To Next Page
Loading...
Need help?
General
