Need help?Do you have a question about the Quantum Data 980 and is the answer not in the manual?
General| Model | 980 |
|---|---|
| Category | Measuring Instruments |
| Maximum HDMI Data Rate | 48 Gbps |
| HDMI Compliance Test | Yes |
| HDCP Compliance Test | Yes |
| HDR Support | Yes |
| eARC Support | Yes |
| Audio Analysis | Yes |
| EDID Analysis | Yes |
| HDCP Analysis | Yes |
| CEC Compliance Test | Yes |
| Resolution Support | Up to 8K@60Hz |
| Output Interfaces | HDMI, DisplayPort |
| Input Power | 100-240 VAC, 50/60 Hz |
| Maximum DisplayPort Data Rate | 32.4 Gbps |
| HDR Formats | HDR10, Dolby Vision, HLG |
| Video Formats | 4K, 8K |
| Color Depth | 10-bit, 12-bit |
| Dimensions | 3.5" |
| Operating Temperature | 0° to 40° C |
| Storage Temperature | -20 to 60 °C |
| Supported Standards | HDMI 2.1 |
Details how to set up capture parameters like buffer size and trigger conditions.
Primary panel for detailed examination of protocol transactions and data.
Steps for capturing and analyzing HDMI source device data using the 980.
Guide to configuring the Link Mode (Sink Emulation, Pass-Through, Encrypted Link).
Procedures for provisioning the 980 with EDID files for emulation.
Explains various automatic trigger options for capturing data.
Procedures for viewing captured data using Data Decode and Event Plot panels.
Instructions for using the Pass-Through mode to monitor HDMI traffic.
To Next Page
