980 User Guide Rev. B29
Page 3 August 5, 2011
5.4 Monitoring the HDMI auxiliary channels in real time 111
6 Analyzing HDMI Protocol Data with your 980 Protocol Analyzer 116
6.1 Overview 116
6.2 Operational workflow for capturing data with your 980 Protocol Analyzer 116
6.3 Setting the Configuration of the Link Mode 116
6.4 Setting the RX HDCP mode 117
6.5 Setting the +5V levels 118
6.6 Configuring the 980 with an EDID 120
6.7 Viewing Incoming Video (Built-Embedded GUI only) 121
6.8 Using automatic triggering 124
6.9 Using External Triggering 129
6.10 Using Manual Triggering 129
6.11 Using Precision Trigging and Pre-Capture Filtering 130
6.12 Examining Captured Data 134
6.13 Running HDMI tests using the Pass-Through Mode 145
6.14 Loading or importing existing captures with the 980 Protocol Analyzer 152
6.15 Running HDMI tests using the Encrypted Link Analyzer 156
6.16 Transferring Capture Files from the 980 to a PC 165
7 Standard Tests 167
7.1 Running a video timing test 167
7.2 Running a video analysis test 173
7.3 Audio Analysis 180
7.4 AVmute Test 182
8 Audio Return Channel (HEAC) Testing 186
8.1 Test ARC on an HDMI source (ARC Rx) 189
8.2 Test ARC on an HDMI sink (ARC Tx) 191
9 Upgrading the 980 Manager and 980 Protocol Analyzer 194
10 Command Line Interface 195
10.1 Overview 195
10.2 Command Line Examples 197
We wish to thank Chris Pasqualino of Broadcom for his helpful suggestions and feedback during the
development of the 980 Protocol Analyzer. His help in reviewing requirements and providing
useful feedback during alpha testing were greatly appreciated.
To Next Page
Loading...
