Quantum Data 980 - Page 80

980 User Guide Rev. B29
Page 80 August 5, 2011
Item
Item - Column
Description
Add Data
Create Block 0
Enables you to add a new Block 0 to the EDID.
Create Block 1
Enables you to add a new Block 1 to the EDID.
Create Block 2
Enables you to add a new Block 2 to the EDID.
Create Block 3
Enables you to add a new Block 3 to the EDID.
Insert CEA Block
Enables you to add a new CEA extension block.
Insert CEA Audio Data
Block
Enables you to add a new Audio Data Block to the
CEA extension block.
Insert CEA Video Data
Block
Enables you to add a new a new Video Data Block to
the CEA extension block.
Insert CEA Vendor
Specific Data Block
Enables you to add a new a new Vendor Specific
Data Block to the CEA extension block.
Insert CEA Speaker
Allocation Data Block
Enables you to add a new a new Speaker Allocation
Data Block to the CEA extension block.
Insert CEA Video
Capability Data Block
Enables you to add a new a new Video Capability
Data Block to the CEA extension block.
Insert CEA Vendor
Specific Video Data Block
Enables you to add a new a new Vendor Specific
Video Data Block to the CEA extension block.
Insert CEA Colorimetry
Data Block
Enables you to add a new a new Colorimetry Data
Block to the CEA extension block.
Insert CEA Vendor
Specific Audio Data Block
Enables you to add a new a new Vendor Specific
Audio Data Block to the CEA extension block.
Delete EDID Block
Deletes a selected EDID block.
Delete Selected CEA Data
Block or Timing
Deletes a selected CEC data block.
Load EDID from PC file
Loads an EDID from your PC into the EDID Management Editor.
Save EDID to PC
Saves the EDID that you have created or modified using the EDID Management
Editor to the host PC.
Set 980 EDID from PC file
Configures the 980 Rx port with the specified EDID.