quantum
MASCHINEN - GERMANY
Safety
© 2007
GB
Page 918 / 01 / 2008 Version 1.2.5 B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine
disconnect all poles
secure against switching on
check dead circuit
1.5 User’s position
The user must stand in front of the drilling machine.
INFORMATION
The main switch of the drilling machine must be easily accessible.
1.6 Safety devices
Operate the drilling machine only with properly functioning safety devices.
Stop the drilling machine immediately if there is a failure in the safety device or if it is not func-
tioning for some reason.
It is your responsibility!
If the safety device has been activated or has failed, the drilling machine must only be operated
again when
• the cause of the failure has been removed,
• you have made sure that there is no existing danger for persons or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the drilling machine. The possible consequences
are the following
• injuries due to components or parts of components flying off at high speed,
• contact with rotating parts,
• fatal electrocution.
The drilling machine includes the following safety devices:
• an EMERGENCY-STOP button,
• a drilling machine table with grooves to fasten the workpiece or a vice,
• a fixed screwed-on protective cover for the pulleys with micro switch,
• a drill chuck guard with micro switch.
To Next Page
Loading...
Need help?
General
