3. Attach a USB Y cable, Dual USB A to USB Mini B cable from your computer to the Click USB
adapter.
The LTE IoT 2 click powers on. The PWR (Power) LED light illuminates on the USB adapter, and
three LED lights illuminate on the LTE IoT 2 click.
The LTE IoT 2 click connects to a cellular network using the Quectel BG96 module, and is now
ready to receive security and identity information from AWS.
Eseye-enabled Quectel BG96 module Developer Guide v1.8
22
Establishing the cellular connection on the LTE IoT 2 click
To Next Page
Loading...
