ETMHFWCONF – confirms the new host firmware is
applied
Confirms the new host firmware image is applied and then deletes theimage from the modem flash
memory.
Type Syntax Response
Execute
AT+ETMHFWCONF OK
or
ERROR – indicates that the host firmware has not successfully
downloaded onto the Quectel BG96 module. Ensure
AT+ETMHFWGET completed successfully, and you have seen the
+ETMHFWGET:available URC. For more information, see
ETMHFWGET – checks for new host firmware on the facing page.
Example
AT+ETMHFWCONF
OK
35
Eseye-enabled Quectel BG96 module Developer Guide v1.8
ETM Management AT commands
To Next Page
Loading...
