Quectel BG96 - ETMHFWGET - Checks for New Host Firmware

ETMHFWGET – checks for new host firmware
Requests a check for new host firmware. Use the Read function to check if new firmware is already
downloaded and available.
Type Syntax Response
Test Not currently available.
Read Not currently available.
Write
AT+ETMHFWGET=<IMEI>
where <IMEI> is the
unique identity of the
current device.
OK
+ETMHFWGET:checking... – ETM is searching the
configuration file [host] updateurl for new firmware. For
more information, see updateurl on page65.
+ETMHFWGET:none – no host firmware is available. Ensure
that the URL is configured and accessible
or
+ETMHFWGET:available – the latest host firmware is
downloaded and available
or
ERROR
Example
AT+ETMHFWGET=862061234567890
OK
+ETMHFWGET:checking...
+ETMHFWGET:none
Eseye-enabled Quectel BG96 module Developer Guide v1.8
36
ETM Management AT commands