Creating a thing in AWS IoT Core
Do not create things until you have verified the advisory and alert email addresses that you
supplied during AnyNet IRIS configuration. Receiving a verification link may take up to 30
minutes. If you have not received an email, contact Eseye Support: support@eseye.com.
Before you begin
•
Ensure that the AnyNet Secure Cellular Connectivity configuration process is complete on
your AWS account.
•
Eseye connects your thing to AWS over a cellular network. To purchase the requisite SIM
cards, search for AnyNet SIM on Amazon.com.
•
You need a AnyNet Secure SIM number, which is the unique serial number printed on the
back of the SIM card.
To create a thing in AWS IoT Core:
1. Sign in to the AWS Management Console: aws.amazon.com/console
2. In the AWS Services section, find the IoT Core service.
3. In the left-hand AWS IoT menu, select Manage > Things.
19
Eseye-enabled Quectel BG96 module Developer Guide v1.8
Creating a thing in AWS IoT Core
To Next Page
Loading...
