Quectel BG96 - ETMCFGCHECK - Checks if a New ETM Configuration File Is Available

OK
AT+ETMCFG=mqtt,keepalive,1800
OK
ETMCFGCHECK – checks if a new ETM configuration file is
available
This command checks the updateurl for a new configuration file.
Type Syntax Returned Result
Execute
AT+ETMCFGCHECK OK
+ETMCFGCHECK:checking...
+ETMCFGCHECK:complete
If a new configuration file needs to be applied, the
following URC will also appear:
+ETM: REBOOT REQUIRED
You must reboot the system as soon as possible.
or
ERROR – the command failed.
Example
AT+ETMCFGCHECK
OK
+ETMCFGCHECK:checking...
+ETMCFGCHECK:complete
Eseye-enabled Quectel BG96 module Developer Guide v1.8
34
ETM Management AT commands