Quectel BG96 - Page 72

Section Parameter Definition
LTE – LTE only
any (default) – either 2G or LTE
[application] Application parameters
fotaport Modem firmware OTA image protocol IP port. Default: 80
fotaurl Modem firmware OTA image URL, either: http, https, or tftp
If this parameter is not set, it is not included in the
configuration file.
updateport Application firmware update protocol IP port. Default: 80
updateurl Application firmware update URL, either: http, https, or tftp
If this parameter is not set, it is not included in the
configuration file.
[host] Host parameters
updateport Host firmware update protocol IP port. Default: 80
updateurl Host firmware update URL, either: http, https, or tftp
If this parameter is not set, it is not included in the
configuration file.
[config] Configuration file update parameters
updateport Configuration file update protocol IP port. Default: 80
updateurl Configuration file update URL, either: http, https, or tftp
If this parameter is not set, it is not included in the
configuration file.
[mqtt] MQTT parameters
awsjobs AWS jobs topics subscription and for processing jobs instructions,
either:
0 – Do not subscribe to AWSjobs topics
1 (default) – Subscribe to AWS jobs topics
awsshadow AWS shadow mode for reporting a set value to the device
shadow/twin, either:
65
Eseye-enabled Quectel BG96 module Developer Guide v1.8
Using the Quectel BG96 module configuration file