Quectel BG96 - Manufacturing and Soldering Guidelines

Section Parameter Definition
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
iotopmode Enables narrow band internet of things (NBIoT)
0 (default) – iotopmode not enabled
1 – iotopmode is enabled
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
nwscanmode
Consult with Eseye before changing this parameter.
Configure which RATs are searched, either:
0 (default) – automatic
1 – GSM only
3 – LTE only
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
nwscanseq
Consult with Eseye before changing this parameter.
Radio Access Technology(RAT) search sequence.
00 (default) – automatic (LTE Cat M1 to LTE Cat NB1 to GSM)
01 – GSM
02 – LTE Cat M1
03 – LTE Cat NB1
For example, 010203 will initiate a search in the following order:
GSM to LTE Cat M1 to LTE Cat NB1.
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
tech Preferred technology for connecting to the cellular network,
either:
2G – 2G only
Eseye-enabled Quectel BG96 module Developer Guide v1.8
64
Using the Quectel BG96 module configuration file