Quectel BG96 - BG96 Mechanical Dimensions; Module Physical Dimensions and Footprint

Type Syntax Returned Result
•
<netLac> is a two byte location area
code in hexadecimal format
•
<netCellID> is the Cell ID in
hexadecimal format, either:
•
16 bit for 2G
•
28 bit for 3G or 4G
•
<AcT> is radio access technology, either:
•
0 – GSM
•
2 – UTRAN
•
3 – GSM w/EGPRS
•
4 – UTRAN w/HSDPA
•
5 – UTRAN w/HSUPA
•
6 – UTRAN w/HSDPA and w/HSUPA
•
7 – E-UTRAN
or
ERROR – the command failed.
Write
AT+CREG=<Mode>
where <Mode> is either:
•
0 – Disable network
registration unsolicited result
code. You will need to manually
check the network registration
status.
•
1 – Enable network registration
unsolicited result code. If there
is a change in network
registration status, the modem
will automatically return a
response.
OK - the network registration status mode is
successfully set
ERROR - the command failed
59
Eseye-enabled Quectel BG96 module Developer Guide v1.8
Quectel BG96 module AT commands