Quectel RM500Q-AE - Page 16

5G Module Series
RM500Q-AE&RM502Q-AE Hardware Design
RM500Q-AE&RM502Q-AE_Hardware_Design 16 / 83
Downlink: QPSK, 16QAM and 64QAM and 256QAM
⚫ Supports 1.4/3/5/10/15/20 MHz RF bandwidth
⚫ Support downlink 4 × 4 MIMO on: B2/B4/B7/B25/B30/B38/B41/B48/B66
⚫ Max. transmission data rates
3)
:
RM500QA-AE
LTE: Max 1.0 Gbps(DL)/ 200 Mbps (UL)
RM502QA-AE
LTE: 2.0 Gbps (DL) /200 Mbps (UL)
UMTS Features
⚫ Support 3GPP R8 DC-HSDPA, HSPA +, HSDPA, HSUPA and WCDMA
⚫ Support QPSK, 16QAM and 64QAM modulation
⚫ Max. transmission data rates
2)
:
DC-HSDPA: Max 42 Mbps (DL)
HSUPA: Max 5.76 Mbps (UL)
WCDMA: Max 384 kbps (DL)/384 kbps (UL)
Internet Protocol
Features
⚫ Support QMI/NTP* protocols
⚫ Support the protocols PAP and EIRP usually used for PPP connections
SMS
⚫ Text and PDU modes
⚫ Point-to-point MO and MT
⚫ SMS cell broadcast
⚫ SMS storage: ME by default
(U)SIM Interface
⚫ Support (U)SIM card: Class B (3.0 V) and Class C(1.8 V)
⚫ (U)SIM interface
⚫ Support Single (U)SIM
USB Interface
⚫ Compliant with USB 3.1 and 2.0 specifications, with maximum transmission
rates up to 10 Gbps on USB 3.1 and 480 Mbps on USB 2.0.
⚫ Used for AT command communication, data transmission, firmware
upgrade, software debugging, GNSS NMEA sentence output.
⚫ Support USB serial drivers for: Windows 7/8/8.1/10, Linux 2.6–5.4, Android
4.x/5.x/6.x/7.x/8.x/9.x/10
PCIe × 1 Interface
⚫ Complaint with PCIe GEN3, support 8 Gbps per lane, PCIe × 1.
⚫ Used for AT command communication, data transmission, firmware
upgrade, software debugging, GNSS NMEA sentence output
Rx-diversity
⚫ Support 5G NR/LTE/WCDMA Rx-diversity
GNSS Features
⚫ Gen9 Lite of Qualcomm
⚫ Protocol: NMEA 0183
⚫ Data Update Rate: 1 Hz
AT Commands
⚫ Compliant with 3GPP TS 27.007, 27.005 and Quectel enhanced AT
commands
Antenna Interfaces
⚫ ANT0, ANT1, ANT2, and ANT3_GNSSL1
Physical
Characteristics
⚫ Size: (52.0 ±0.15) mm × (30.0 ±0.15) mm × (2.3 ±0.2) mm
⚫ Weight: approx. 8.7