256
S
IZE
lxhxp:
W
EIGHT
:
V
OLTAGE
:
P
OWER
:
T
ANK CAPACITY
:
B
OILER CAPACITY
:
W
ORKING TEMPERATURE
:
290
X
405
X
445
mm
24
K
G
200-240
V
–
50-60
H
Z
/
120
V
–
60
H
Z
1500W
3
L
1,60
LITRES
+5°C
÷
35°C
Commissioning
1. Open the tank filler lid.
2. Fill the tank (n) with drinking water, softened if possible.
3. Connect the machine to an electric socket. Switch on the machine through
the general switch (o) in postion 1, the green light (p) switches on.
4. The machine fills the boiler, indicated by the red light (r) that switches on.
5. Activate the coffee delivery group through the lever (b), deliver water from
the group to make sure that the circuit is correctly filled.
6. Wait for the machine to reach the operating temperature indicated by the red
light (q) that switches off and by the pointer of the boiler gauge (h)
that is to indicate a value between 1 Bar and 1.5 Bar.
Coffee brew
1. Remove the filter holder (c) from its seat, turning it clockwise.
2. Fill the filter with one or two doses of coffee (according to the filter inserted).
3. Press the coffee with the presser.
4. Place the filter holder (c) to its seat, turning it anti-clockwise.
5. Place the cups under the corresponding outlets under the filter holder.
6. Lift the coffee delivery lever (b) to the horizontal position to start the coffee
brew, and after a few seconds starts the coffee brew.
When the desired amount of coffee has been delivered, lower the group lever
to the vertical position.
To Next Page
Loading...
Need help?
General
