308
Coffee brew
1. Remove the filter (c) holder from its seat, turning it clockwise.
2. Fill the filter with one or two doses of coffee (according to the filter inserted).
3. Press the coffee with the presser.
4. Place the filter holder to its seat, turning it anti-clockwise.
5. Place the cups under the corresponding outlets under the filter holder.
6. Lift the coffee delivery lever (b) after a few seconds the coffee brew starts.
When the desired amount of coffee has been delivered, lower the group
lever.
It is recommended to be very careful of the machine hot parts, especially the
delivery group and the steam pipe. Never place the hands under the steam
pipe and/or the group when carrying out the relevant operations.
Steam delivery
Open the tap (d) and discharge a little steam into the drip tray then
immerse the steam wand in the liquid to be heated and open the tap
(d), when the required temperature is reached, close the tap.
After heating the beverage, discharge a little steam from the pipe to clean the
spray holes.
Hot water delivery
1. Place a container to collect the water under the hot water
distributor (g).
2. Open the water tap (f) to deliver the hot water
3. When the required level is reached close the water tap.
To Next Page
Loading...
Need help?
General
