Quincy Compressor QOF 20 - Section IV - Installation guidelines

Section IV - Installation guidelines
72 Quincy Compressor
• Dimension drawing
• Installation proposal
• Electrical connections
• Pictographs
Dimension drawing
ThedimensiondrawingscanbefoundontheCD,deliveredwiththecompressor.
Herebyalistofcommonlyusedtermswiththeirtranslation:
Text on drawings Translation
Cooling air outlet of aftercooler and dryer Cooling air outlet of aftercooler and dryer
Cabinet ventilation Cabinet ventilation
Cooling air outlet of compressor Cooling air outlet of compressor
Electriccablepassage Electriccablepassage
Compressed air outlet Compressed air outlet
Manual drain Manual drain
Ambientsensor Ambientsensor
Automaticdraintube Automaticdraintube
Compressor mounting holes Compressor mounting holes
Cooling air inlet of aftercooler and dryer Cooling air inlet of aftercooler and dryer
Cooling air inlet of compressor and cabinet Cooling air inlet of compressor and cabinet
Center of gravity dimensions and mass Center of gravity dimensions and mass
Installation proposal
Outdoor/altitude operation
NOTICE!
If the compressor is installed outdoors or if the air inlet temperature can be below
0 °C (32 °F), precautions must be taken. In this case, and also if operating at high
altitude, consult your supplier.