20
Temperatures
Temperatures
The 'Cold', 'Hot' and 'Outlet' are read only values and can be used to monitor the
current settings. They are continuously updated every 2 seconds.
Adjusted Setpoint
1. Input 'Adjusted Setpoint' value
2. Click 'Set' to transfer the value to the DRV40
3. The 'Adjusted Setpoint' value is displayed on the DRV40 as 'Setpoint'.
4. To change the 'Adjusted Setpoint' back to the default value, click 'Reset to
Default'.
Temp 42˚C
Setpoint 43˚C
To Next Page
Loading...
Need help?
General
