rada DRV40 - Common Fault: Temperature Rise in Zero Demand; Likely Display Errors for This Fault

58
Common Faults
Problem: “Blend temperature rises when system is in zero demand...”
DRV40 display errors
These are the most likely error
messages to be displayed
during this problem. For the
most probable causes and
solutions see 'DRV40 Display
Errors'.
If any other error message is displayed see 'DRV40 Display Errors'.
Error PCB
Temp 49˚C
Error Motor
Temp 49˚C
Error Thermistor
Temp 49˚C
Temp High
Error Temp
49˚C