Using the Handset and Base Menus
To open the menu, press the MENU soft key.
Highlight the option you want by pressing or on the
four-way function key. This will move the cursor; the option
currently highlighted appears in reversed out text.
Select the highlighted option by pressing the OK soft key.
To exit the menu and return to standby, press on the
handset or /EXIT on the base.
If you do not press a key within 30 seconds, the
phone will time out and exit the menu. When
setting Date and Time, the time-out period is
extended to two minutes.
For GLOBAL SETUP, ANSW. SETUP,
DEREGISTRATION (handset), and REGISTER
HANDSET (base) menu options, make sure
the line is not in use, and if you access from a
cordless handset, the handset is within range of
the base.
Only one station can change GLOBAL SETUP or
ANSW. SETUP menu options at a time.
If you change one of GLOBAL SETUP menu
options, you change that setting for all registered
handsets.
•
•
•
•
1.
2.
3.
4.
To Next Page
Loading...
