Radio Shack 43-143 - Using Call Waiting

53
Beyond the Basics
Deleting All Caller ID Records
1. When the phone is in standby, press .
2. Press the
DELETE soft key.
3. ARE YOU SURE? appears in the display. Select YES.
4. You will hear a conrmation tone, and DELETED! appears in
the display.
NOTE
When you delete a Caller ID number, you delete it
permanently.
Using Call Waiting
If you have Call Waiting service and a second call comes in when
you are on the phone, a call waiting tone will sound.
To accept the incoming call:
HANDSET: Press /FLASH.
BASE: Press FLASH/FIND HANDSET.
There is a short pause, and then you will hear the new caller.
To return to the original caller:
HANDSET: Press /FLASH again.
BASE: Press FLASH/FIND HANDSET again.
NOTE
You must subscribe through your telephone
provider to receive Call Waiting services.
UP841BH_43-143_OM3.indd 53 12/19/2006 6:55:23 PM