Radio Shack 43-143 - Deleting a Redial Record

Beyond the Basics
56
OR
To dial the number selecting a particular line:
HANDSET: Press the LINE1 or LINE2 soft key.
BASE: Press LINE1 or LINE2.
OR
1.
HANDSET: Press /FLASH or SPEAKER.
BASE: Press or pick up the base corded handset.
The phone will automatically select a free line.
OR
To dial the number selecting a particular line:
HANDSET: Press the LINE1 or LINE2 soft key.
BASE: Press LINE1 or LINE2.
2. Open the redial list and nd the number you want to dial.
3. Press the
DIAL soft key to dial the number.
NOTES
If the number exceeds 32 digits, only the rst 32
digits are retained in redial memory.
If the redial memory is empty, you will hear a beep.
•
•
Deleting a Redial Record
If you want to delete a phone number from the redial list, follow
the steps below:
1. Open the redial list when the phone is in standby.
2. Use
or to scroll through the redial list.
3. When you nd the number you want to delete:
HANDSET:
Press the OPTIONS soft key, and then select
DELETE SELECTION option.
BASE: Press the DELETE soft key.
4. ARE YOU SURE? appears in the display. Select YES.
5. You will hear a conrmation tone, and DELETED! appears in
the display.
UP841BH_43-143_OM3.indd 56 12/19/2006 6:55:23 PM