Conferencing
If you have multiple cordless handsets, up to seven people can
participate in a conference call. A seven-way conference call
consists of an outside line 1 + outside line 2 + base + four
handsets. Up to four handsets can participate in any conference
call. You can easily join a call already in progress.
1.
Press corresponding line key (the LINE1 or LINE2 soft key
on the handset, or LINE1 or LINE2 on the base) to join the
conference call.
2. To hang up:
HANDSET: Press or return the handset to the charger.
BASE: Press or return the corded handset to the
base.
The other party will still be connected to the call.
Conferencing with one outside line
To hold a conference call with one outside line, simply have the
handsets or base join the call.
Conferencing with 2 outside lines
Follow the steps below to allow both outside lines to participate
in a conference call:
1. During a call, press
INT’COM/HOLD on the handset or base
to put the rst caller on hold.
2. Press the line key (the
LINE1 or LINE2 soft key on the
handset, or LINE1 or LINE2 on the base) for a free line to
make or answer a second call.
3. When the second call is connected, press the
MENU soft key,
and then select CONFERENCE to initiate a conference call.
4. To disconnect a single caller, press the corresponding line
key (the LINE1 or LINE2 soft key on the handset, or LINE1
or LINE2 on the base) to place the caller you wish to keep
speaking to on hold and then press on the handset or
on the base to hang up the other caller.
To Next Page
Loading...
