Setting a Security Code or Personal
Identication Number (PIN)
To play your messages from a remote location, you will need to
enter a two-digit security code or Personal Identication Number
(PIN). The default security code is 80.
1. Press the
MENU soft key.
2. Select the ANSW. SETUP menu, and then the SECURITY
CODE submenu.
3. Move the cursor to select
or , and then press the OK
soft key.
4. Enter a two-digit security code (01-99) using the number
keypad (0 - 9).
5. Press the
OK soft key. You will hear a conrmation tone.
Using the Answering Machine
Turning Your Answering Machine On and Off
From the Base
Turning On
1. With the phone in standby, press
.
2. Press the
LINE1 or LINE2 soft key.
3. The answering machine announces “Answering System is
on” and plays the current greeting message.
4. The message counter displays the number of messages
stored in memory. If the counter ashes, then you have new
messages waiting.
To Next Page
Loading...
