If the line(s) is already in use, the base and all
registered handsets that are not currently in use
will display IN USE with the corresponding line
icon.
To have the phone select Line 1 or Line 2 instead
of a free line, set the default telephone line (see
page 27).
During a call, if the other line receives a call, the
line icon will ash.
•
•
•
Making a Call from the Phonebook
1. When the phone is in standby, press to open the
phonebook.
2. Scroll through the list with
or , or use a number key
(0, 2 – 9) to nd the phonebook entry you want to call. (See
“Finding and Viewing a Phonebook Entry” on page 36.)
3.
To dial the number:
HANDSET: Press /FLASH or SPEAKER.
BASE: Press or pick up the base corded handset.
The phone will automatically select a free line.
OR
To dial the number selecting a particular line:
HANDSET: Press the OPTIONS soft key, select LINE1 or
LINE2 and then press the OK soft key.
BASE: Press LINE1 or LINE2.
OR
HANDSET: Press /FLASH or SPEAKER.
BASE: Press or pick up the base corded handset.
The phone will automatically select a free line.
To Next Page
Loading...
