Radio Shack 43-143 - Tone Dialing Switch over

65
Beyond the Basics
5. You can turn off the room monitor from either station.
Press the END soft key on the station (or on the handset or
return the handset to the charger.)
NOTES
For added mobility and convenience, you can
use a handset placed in another room/location
(where no station was installed) to function as a
microphone to pick up sounds.
This feature only works when handset(s) to be
used for this feature are within the range of the
base.
If you select a handset in step 2 and the handset
is out of range, UNAVAILABLE appears in the
handset display. Then the operation will be
canceled.
•
•
•
To Protect the Station from Monitoring Request
If you want to prevent the station from monitoring by another
station, follow these steps:
1. Press the
MENU soft key, and then select the HANDSET
SETUP or BASE SETUP menu.
2. Select the ROOM MONITOR submenu.
3. Move the cursor to select OFF.
4. Press the
OK soft key.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can switch
to tone dialing after the call connects. This feature is useful when
you need tone dialing to use automated menu systems, such as
telephone bank tellers, telephone prescription rells, customer
support menus, etc.
1. Make your call normally.
2. Once your call connects, press
/TONE on the station.
UP841BH_43-143_OM3.indd 65 12/19/2006 6:55:26 PM