4. Enter the number for this entry (Edit Number 1).
Once you have stored a name, EDIT NUMBER1 appears next.
Use the number keypad, right or left on the four-way function
key, or the DELETE soft key to enter the phone number 1;
the phone number can contain up to 32 digits. If you need
the phone to pause between digits when it’s dialing (for
example, to enter an extension or an access code), press
REDIAL/PAUSE on the handset or the PAUSE soft key on the
base to insert a two-second pause. You will see a “P” in the
display. You can also use more than one pause together if
two seconds is not long enough. Each pause counts as one
digit. Press the OK soft key when you are nished.
EDIT NUMBER 2 appears next. Use the same procedure
when entering the phone number 1 to enter the phone
number 2. Press the OK soft key when you are nished.
5.
Assign a personal ring tone for this entry (Personal Ring)
(Cordless Handset Only).
You can attach a personalized ring tone to each phonebook
entry; the phone will use this ring tone when this person
calls. Move the cursor to highlight one of the 20 different ring
tone options. As you highlight each ring tone, you will hear
a sample of that tone. If you do not want to use a personal
ring tone for this phonebook entry, select the NO SELECTION
option, and the phone will use your standard ring tone
setting. When you hear the ring tone you want to use, press
the OK soft key.
6.
Assign this entry to a Speed Dial number (Speed Dial).
Your phone has 10 speed dial numbers, 0 to 9. Move the
cursor to select the speed dial number you want to assign to
this phonebook entry. If you do not want to assign this entry
to a speed dial number, select the NO SELECTION option.
Press the OK soft key.
To Next Page
Loading...
