23
Monitor Memories
The scanner also has 5 temporary memory locations
called monitor memories. You can use these monitor
memories to temporarily store frequencies while you
decide whether to store them into a channel. This is
handy for quickly storing an active frequency when you
search through an entire band (see “Searching For and
Temporarily Storing Active Frequencies” on Page 26).
While you are searching frequencies, the 5 numbers at
the top of the display indicate the 5 monitor memories.
MON
appears and the number beside it that flashes in-
dicates the currently active monitor memory.
To Next Page
Loading...
Need help?
General
