Radio Shack HANDHELD TRUNKING 20-521 - LISTENING TO THE MONITOR MEMORIES; MOVING A FREQUENCY FROM A MONITOR MEMORY TO A CHANNEL

30
Notes:
• If you marked all frequencies to be skipped within
the search range, the scanner beeps 3 times and
does not search.
• If you program more than 20 frequencies to skip,
each new frequency replaces one you already
stored, starting from the first frequency you stored.
• Press t or s to select a skipped frequency while
HOLD
appears.
L/O
appears when you select a
skipped frequency.
LISTENING TO THE MONITOR
MEMORIES
You can listen to the fre-
quency you stored in any
one of the five monitor
memories by pressing
MAN
,
MON/CLEAR
, then
the number of the moni-
tor memory you want to
listen to (1
–
5).
Note: To listen to the
monitor memories, the
priority channel feature
must be turned off (see
“Priority” on Page 34).
MOVING A FREQUENCY FROM A
MONITOR MEMORY TO A
CHANNEL
1. Press
MAN
.
MAN
appears.
2. Enter the number of
the channel where
you want to store
the frequency in a
monitor memory,
then press
PROG
.
PGM
appears.