10
Caution:
If you use the transceiver in a vehicle, mount it securely
to avoid damage to the transceiver or vehicle, or injury to anyone
in the vehicle during sudden starts or stops.
Follow these steps to mount the transceiver.
1. Using the mounting bracket as a template, mark the posi-
tions for the screw holes on the mounting surface,
2. In each marked location, drill a hole slightly smaller than the
supplied self-tapping screws.
Caution:
Be care not to drill into objects behind the mount-
ing surface.
3. Using a Phillips screwdriver, attach the mounting bracket to
the mounting surface with the supplied mounting screws
and flat washers.
4. Attach the transceiver to the mounting bracket using the
supplied rubber washers and mounting knobs.
V
O
L
O
P
S
Q
To Next Page
Loading...
