Radio Shack HTX-252 - Memory Operation; Storing Frequencies; Recalling Memories

25
MEMORY OPERATION
Your transceiver has 10 standard memory locations that you can
use to store frequencies for quick access. You can also store oth-
er settings for each memory location, such as the repeater offset
and the CTCSS tones.
STORING A TRANSMIT/RECEIVE
FREQUENCY
1. Select the frequency you want to store by using the tuning
control or
UP
/
DN
.
2. If desired, select an offset frequency, offset direction, and
CTCSS frequency for the selected frequency (see “Setting
the Repeater Offset Frequency” on Page 23 and “Continu-
ous Tone Coded Squelch System Features” on Page 28).
3. Press
F
+
MS
. A memory location appears and flashes if
empty. To select a different memory location, repeatedly
press
UP
/
DN
or rotate the tuning control.
4. Press
MR
. The transceiver stores the selected settings in
the memory location.
5. Press
VFO
to exit the memory mode.
RECALLING MEMORIES
1. Press
MR
so a memory location number appears.
2. Press
UP
or
DN
or rotate the tuning control to select the
desired memory location.
3. Press
VFO
to return to the VFO mode.