Radio Shack HTX-252 - A Quick Look at the Controls

15
A QUICK LOOK AT THE CONTROLS
Most of the controls on the transceiver have multiple functions.
The following charts should help you get a better idea of the func-
tion of each control.
Base Unit
Key/Control Use it to:
Use with the
F + Key to:
OFF/VOL
Turn the transceiver on/
off. Adjust the volume.
Reset the
transceiver
SQ
Set the squelch level to
block weak signals.
N/A
REV
Reverse the
repeater offset.
N/A
VFO (T-SQ)
Set the transceiver to
VFO mode.
Set the tone
squelch.
MR (MS)
Recall a frequency in
memory.
Store a frequency
in memory.
Tuning Control
Change the frequency
by the set STEP value.
Change the
frequency by 1 MHz
steps.
OFF/VOL Tuning Control
SQ REV VFO MR
(T-SQ) (MS)