RADIOLINK ELETRONIC LIMITED
done to get a “fresh start” and clear the memory before inputting new model settings.
(1) Enter the function menu and use “Dec(-)” or “Inc(+)”
button to access RESET function.
(2) Press “Enter” button to get into RESET function interface,
the symbol “YES” will blink.
Press “Enter” key, the symbol “YES” will stop blinking, and
return to the initial screen. Now the model data is reset to the
initial setting that is the default value set at the factory.
Press “Dec(-)” or “Inc(+)” button, the symbol “YES” will stop
blinking and the symbol “NO” will blink, press “Enter” key, the symbol “NO” will stop blinking,
return to the initial screen by pressing “Exit” button twice.
Or you can press “Exit” button twice to quit resetting directly.
CAUTION: Resetting the current model memory will permanently erase ALL programming
information for that model. The data cannot be recovered. Do not reset the model unless you are
certain you want to clear-out that memory and start from scratch.
Thank you again for using our product, we hope it can bring you happiness!
To Previous Page
Loading...
Need help?
General
