RADIOLINK ELETRONIC LIMITED
INTRODUCTION
Thank you for choosing Radiolink 2.4 GHz 6 channels pistol grip radio -- RC6GS.
RC6GS is default 6 channels transmitter, sells with receiver R6FG which with gyro integrated and HV
RC6GS, work with FHSS spread spectrum and 67 channels pseudo frequency sequence hopping, both
transmitter and receiver use industrial chip ensure superior anti-interference ability both at the same
frequency band and different frequency band and anti-sparks interference ability. Ground control
distance is up to 400 meters.
Suggestion: In order to fully enjoy the benefits of this remote control equipment and ensure safety,
please read the introduction carefully and set up the device as described below.
If you found any problems during the operation process, please refer to the manual. If the problem
still exists, you could contact our dealers to find out the way to solve it. And you could also log in BBS
(such as https://www.facebook.com/Radiolink-1455452961436694/
www.rcgroups.com) or call our after-sales (+86-0755-88361717) to check the issues related answer.
Due to unforeseen changes in production procedures, the information contained in this manual is
subject to change without notice.
More information please check our website as below:
Support and Service: It is recommended to have your Radiolink equipment serviced annually during
your hobby’s “off season” to ensure safe operation.
Please be sure to regularly visit the Service and Support web site at www.radiolink.com. This page
includes extensive programming, use, set up and safety information.
Any technical updates and manual corrections will be available on this web pages. If you do not find
the answers to your questions there, please see the end of our contact area for information on
contacting us via email for the most rapid and convenient response.
Please start here for getting more service.
Email: after_service@radiolink.com.cn/after_service1@radiolink.com.cn
Please start here for answers to technique questions:
Email: alice@radiolink.com.cn
To Next Page
Loading...
Need help?
General
