RadioLink RC6GS - Model Select MODEL; End Point Adjuster EPA

RADIOLINK ELETRONIC LIMITED
www.radiolink.com
10
(1) Access the function menu (By pressing “ Exit ” and
“ Enter”buttons simultaneously and holding them down for
one second), the Language select function will be chosen.
(2) Press “Enter” button to get into “LANGUAGE” function
interface.
(3) Use“Dec(-)”or “Inc(+)”key to select “中文”or “English”,
the selected language will be with black shading effect.
(4) Press “Enter” button, the desired language is selected, and
return to the initial screen automatically.
4.3 Model Select "MODEL"
RC6GS can store model memories for ten models. Use this function to call a new model.
(1) Access the function menu (By pressing “Exit” and“Enter”
buttons simultaneously and holding them down for one second),
press“Enter”key once, the Model select function will be chosen.
(2) Press “ Enter ” button, the current active model will be
blinking.
(3) To activate a different model by pressing“Dec(-)” or“Inc(+)”
button until the desired model blinks.
(4) Press “Enter” button, the selected model stops blinking, now
the model has been selected.
(5) Return to the initial screen by pressing “Exit” button twice.
4.4 End Point Adjuster "EPA"
Use EPA when performing left and right steering angle adjustments, throttle high side/brake side
operation amount adjustment, and channel 3 servo up side/down side operation amount adjustment
during linkage.
Correct the maximum steering angle and left and right steering angles when there is a difference in
the turning radius due to the characteristics, etc. of the vehicle.
Setting item (channel and direction)
ST :Steering (left/right)
TH: Throttle (forward/brake)
CH3: 3rd channel (left/ right)
CH4: 4th channel (left/ right)
CH5: 5th channel (left/ right)
CH6: 6th channel (left/ right)
Steering EPA Throttle EPA
ST:0%~120%(left/ right) TH:0%~120%(forward/brake)
Initial value:100% Initial value : 100%