RadioLink T8S(BT) User Guide

9
Chapter 2 Parameters Setup APP
2.1 Mobile phone APP
2.1.1 Mobile Phone APP Installation
Android APP:
Visit
https://www.radiolink.com/t8s_apps
to download the android APP to setup T8S
parameters by Bluetooth connection.
NOTE: The APP will not collect any user's information,
you can even use this APP without Internet connecting. The
APP asked for Location Permission only used for connecting
and telemetry function.
Apple APP: Search Radiolink in Apple store (See picture
on the right) and then click it to download.
2.1.2 Mobile Phone APP Connection
Connection of both Android APP and Apple APP to T8S are the same as below:
① When the installation of parameter setup APP is complete, press the power button to turn
on T8S.
② Click to enter the APP, a message will pop out to ask for permission to turn on the
Bluetooth function.
③ Click CONNECT on the top left of interface, a list of devices will pop out for selection.
④ Select RadioLink device, the two LED indicators at rightmost will flash with DD sounds.

RadioLink T8S(BT) Specifications

General

Brand	RadioLink
Model	T8S(BT)
Category	Remote Control
Language	English