24
The interface of parameter setup APP on phone
ELEV 1 and RUDD 2 correspond to the response rate of channel 2 when performing elevator
operation and rudder operation.
ELEV 2 and RUDD 1 correspond to the response rate of channel 4 when performing elevator
operation and rudder operation.
The specific value is the amount of servo travel range when the corresponding channel
performs the elevator or rudder operation. Positive and negative values represent different
directions of movement.
The interface of parameter setup software on computer
3.4 PROG.MIX Menu
3.4.1 PROG.MIX
Programmable mix control is custom mix settings, which can independently select the
master channel and slave channel. It is often used to compensate for the attitude changes of the
aircraft.
To Next Page
Loading...
