12
2.2 Software APP on Computer
2.2.1 Software APP Installation on Computer
Go to the official website https://www.radiolink.com/t8s_apps to download the computer
software APP, and run the program below.
If it
’
s your first time to use computer parameter APP, you need to install the driver before
using it. Please click the link below to download and install driver:
https://www.radiolink.com/filedownload/39598
or contact us by email at: after_service@radiolink.com.cn
2.2.2 Software APP Connection on Computer
After the driver is installed, T8S transmitter can connect to computer parameter software.
(1) Turn on T8S transmitter, and connect it to the computer with a USB data cable.
(2) Open the parameter software in the downloaded file. Choose Port Number (The COM
port of different computers will be different), click OPEN to connect.
Note: If the driver is installed normally, but the COM port connected to T8S cannot be
detected, you could try another USB data cable. Do not use USB charging cable.
To Next Page
Loading...
