Getting started 33
Main window
When the instrument is switched on the Main window is displayed.
1. Title bar: indicates the instruments name and the current time.
2. Check or Run: check or run the selected method /sequence.
The method can be run when 2 sunny icons are displayed in
the Reagents and Electrodes tabs. If a cloudy/stormy icon
is displayed, activate the "Check" command. The Titration
Manager will automatically guide you through the necessary
operations required to solve the problem(s).
3. Select method: select method and view the main parameters of
that method.
4. Sequence/sample stack: if a Sample Changer is used and
declared in the Conguration menu, program the sample stack.
Select or edit the sequence.
5. GLP-Archives: access GLP tables and visualise the stored
method sample results.
6. Method library: supervisor use only: create, edit, reset and delete
methods to correspond to your specic needs.
7. Method tab: Animated icon indicates when a method/sequence is
running.
7
1
2
3
4
5
6
To Next Page
Loading...
Need help?
General
