36 Chapter 2
Electrodes window
Use the RIGHT arrow key to move to this window.
1
2
4
5
6
3
1. Title bar: indicates the name of the window.
2. Calibrate electrode: run a calibration or a calibration sequence
using the installed electrodes.
3. Display measurement: displays mV and/or pH and/or temperature
at a connected electrode of the electrode system.
4. GLP-Archives: access GLP tables and visualise the last electrode
calibration results.
5. Electrode library - Supervisor use only: create, edit, reset and
delete electrodes stored in the instrument.
6. Electrode tab: Electrode status icon indicates the state of the
electrode system.
Four types of icons can be displayed.
To Next Page
Loading...
