Radiometer Analytical TitraLab TIM845 - Programming method parameters

Programming guidelines 61
Programming method parameters
1. Go to the last Edit method screen.
2. Enter the parameters. The parameters displayed will all depend on
the measurement type and mode selected.
3. Press 1:
To enter the Method parameters: general parameters
concerning the electrode and reagent (when required) used by the
method and the titration parameters.
4. Press 2:
To enter the Sample parameters: concerning the sample amount
analysed.
5. Press 3:
To enter the Results parameters dening the results and
stoichiometric coefcients for the chemical reaction (if required).
6. Press 4:
To enter the Printouts: parameters dening the analysis report to
be printed.