64 Chapter 4
Run electrode calibration
Refer to Short-Form Reminder no. 4.
1. Select the method.
2. Install the electrode group.
3. Enter the Electrodes window.
4. Select 1 Calibrate electrodes. Press to select the
electrode to be calibrated from the proposed list.
5. Press 1 to start the calibration.
Run reagent calibration
Refer to Short-Form Reminder no. 5.
1. Select the method.
2. Install the reagent to be calibrated.
3. Install the electrode group to be used to perform the calibration.
4. Enter the Reagents window.
5. Select 1 Calibrate/Enter titre. Press and select the
reagent from the proposed list.
6. Press 1 to start the calibration.
Run method
Refer to Short-Form Reminder no. 6.
1. Select the method.
2. Install the electrode then the reagent groups to be used to perform
the analysis.
3. Display the Main window.
4. Press 1 to start the analysis.
To Next Page
Loading...
