Running analyses 65
Run sequence
Refer to Short-Form Reminder no. 7.
1. Install the electrode then the reagent groups to be used to perform
the analysis.
2. Display the Main window. Press 3 then 1 and prepare the sample
stack.
3. Display the Main window. Press 1 to start the analysis.
Run direct measurement
Refer to Short-Form Reminder no. 8.
1. Select the method.
2. Install the electrode group.
3. Display the Electrodes window.
4. Press 2 to start the measurement.
5. Select the electrode in the list. You can stop or start stirring by
pressing 1.
To Next Page
Loading...
