Radiometer Analytical TitraLab TIM845 User Manual

Programming guidelines 53
Programming electrode parameters
1. If Calibrate request = yes, enter the electrode denition
parameters and go to the last Edit electrode screen.
2. Press 1:
To enter Calibration parameters: general parameters used during
the calibration,
3. Press 2:
To enter Calibration solutions parameters concerning the
standards used for the calibration,
4. Press 3:
To enter the Results parameters concerning acceptation criteria
that you can set on the results.
5. Press 4:
To enter Printouts parameters dening the calibration report to be
printed.

Radiometer Analytical TitraLab TIM845 Specifications

General

Brand	Radiometer Analytical
Model	TitraLab TIM845
Category	Laboratory Equipment
Language	English