46 Chapter 2
6. You can also use a PC keyboard to enter alphanumeric characters.
Connect the PC keyboard to the 6-pin plug situated on the left
hand side of the instrument.
Select the line Radiometer Analytical. This line is used to enter
information concerning the workplace, user(s) name(s), location,
address etc.
Enter the text using the PC keyboard (maximum of 32 charac-
ters can be used).
If the characters shown on the display do not correspond to the
ones typed on the keyboard, redene your keyboard type. To do
this, press Esc then 1 and select PC keyboard.
Press to conrm.
You have now nished the getting started section. Press Esc to leave the
Customise screen, then press 5 to quit the SETUP menu.
To Next Page
Loading...
Need help?
General
