Getting started 19
Reagents windowReagents window
Reagents windowReagents window
Reagents window
Use the RIGHT arrow key to move to this window.
1
2
4
5
7
9
3
8
1. Title bar: indicates the name of the window.
2. Calibrate/Enter titre: determine the concentration of the titrant
(titre) by running a calibration or a calibration sequence or by
entering the titre manually.
3. Install reagents: install or replace reagents in a method or se-
quence.
4. Check reagents: verify the identification parameters of the
reagents used in the working method or sequence.
5. Reagent library- supervisor use only: create, edit, reset and delete
reagents to correspond to your specific needs.
6. Manual dosing: delivers a reagent at a given speed and measures
a signal at a connected electrode.
7. GLP-Archives: access GLP tables and visualise the stored reagent
calibration results.
8. Burette functions: fill, empty, flush, rinse and burette service
position. Global flush of all installed burettes simultaneously.
9. Reagent tab: Reagent status icon indicates the state of the reagent
system. Five types of icons can be displayed.
6
To Next Page
Loading...
Need help?
General
